How to Use Your NAD+ Pen

This guide will walk you through how to safely and effectively use your NAD+ pen from start to finish. You can watch the video or follow the guide below. Always follow the dosage your clinician has recommended.

Step by Step Guide

1. Remove the cap (do not twist).

  • Hold the pen upright and simply pull the cap off. Inside, you’ll see the pre-loaded NAD+ cartridge. You don’t need to remove this - it’s already installed and ready to go.

2. Attach the needle tip.

  • Take the sterile needle from its packaging.

  • Remove the small plastic cover from the base of the needle and twist it onto the end of the pen.

  • Leave the outer needle cap on for now.

3. Choose your injection site.

  • Use an alcohol wipe to clean your skin.

  • You can inject into, the side of the hip/buttocks or the thigh

  • Choose the area that feels easiest and most comfortable for you.

4. Set your dosage.

  • Turn the dial on the pen to match the dosage prescribed by your clinician. (For example: 30 units)

5. Remove the needle cap.

  • Once your dose is set, carefully remove the cap from the needle.

6. Inject at a 45° angle.

  • Gently pinch the skin on the thigh or hip.

  • Hold the pen at a 45-degree angle to the skin.

  • Insert the needle smoothly.

  • Press the top of the pen slowly and steadily until all the NAD+ is delivered.

7. Count to five.

  • Hold the needle in place for 5 seconds after injection to ensure full delivery.

8. Dispose and recap.

  • Twist off the used needle tip and place it in a sharps bin.

  • Replace the pen cap.

  • Store your pen in the fridge until your next dose.

Important Notes

  • Always follow your prescribed dosage.

  • Only inject in clean, disinfected areas.

  • Store your pen in the refrigerator.

  • Use a new sterile needle for every injection.

  • Dispose of all needles safely in a sharps container.

Get in Touch

Get in touch for an obligation free quote

© Copyright 2025. Total Therapy London. All Rights Reserved.